SEHK Mainboard-listed Company
Stock Code:00868
Your Current Location:Home > Product & Service > Architectural Glass



Download


Engineering Glass




Tempered Glass 


Tempered glass refers to glass whose molecular structures change greatly after heated at high temperature (at 650℃, it starts to become soft) and quenched and thus there appears even and strong pressure stress on glass surface as well as even and strong tensile stress inside, to multiple mechanical strength of glass.


 

Product Manual

Sales Network

Certification

Model Contract

Definition of Tempered Glass
Tempered glass refers to glass whose molecular structures change greatly after heated at high temperature (at 650℃, it starts to become soft) and quenched and thus there appears even and strong pressure stress on glass surface as well as even and strong tensile stress inside, to multiple mechanical strength of glass.

Definition of Heat Strengthened Glass
The processing principle of heat strengthened glass is similar to that of tempered class. Its heating temperature is around 650℃, a little lower than that for tempered glass. Besides, its cooling speed is low just like that of tempered glass. The only difference between such glass and tempered glass is that: its strength is lower than that of tempered glass, about twice that of common glass. However, like annealed glass, its pieces (when broken) are large in size. Thus, it can not be used as safety glass. The bending of heat strengthened glass is smaller than that of tempered glass and the thermostability of heat strengthened glass is much better than that of annealed glass.

Equipment and Processing Capability
Xinyi Company introduced 10 tempered glass production lines of different specifications from TAMGLASS and GLASSROBOTS in Finland and famous manufacturers in China. Among them, the newest and the most advanced forced convection type/radiation heating type FTM toughening furnace which was introduced from GLASSROBOTS in Finland to manufacture Low-E glass conductively heats glass through hot air convection, evenly heat the inner and outer surfaces of the glass until their temperatures reach tempering temperature in a short time (if the heating speed is increased significantly, the heating duration can be reduced by 30%). It helps to overcome the difficulties with steel processing caused by coated glass’s reflection of heat radiation, ensure coated glass keeps its good flatness in the process of heating steel, as well as reduce surface quality problems such as film damage, trace of roller and hard spots caused by relative long-time heating during the production of common toughening furnaces. Therefore, tempered glass produced by it enjoys better optical quality.

Specification of Flat Glass
◆ Product thickness: 3mm-25mm
◆ Minimum size: 300mm﹡300mm
◆ Maximum size: 2400mm﹡7500mm

Output
Annual production capacity of 5,000,000m2, one of the largest manufacturing enterprises in China at present.

Applicable Scope
◆ Tempered glass are safety glass. It is widely applied in places which have high requirements for mechanical strength and safety such as glass door, curtain wall for building, elevation windows, interior partition, furniture, as well as partitions close to sources of heat and places which are subject to severe thermal shock.
◆ As heat strengthened glass does not explode by itself, it is widely used in glass curtain walls, greenhouses, partitions and decoration industry.

Product Certification
◆ National compulsory 3C certification
◆ Australia AS/NZS 2208 certification
◆ U.K. BS6206 certification
◆ U.S. ANSI Z97.1 certification
◆ SGCC certification
◆ Japan JIS certification

Company Name Xinyi Glass Works (Dongguan) Co., Ltd
Address Xinyi Glass Industrial Zone, Ludong, Humen Town, Dongguan, Guangdong, P.R.C.
Tel 0769-85233715;0769-85266666-8715
Fax 0769-85264888;0769-85235466
Company Name Xinyi Energysmart Glass (Wuhu) Co., Ltd
Address Xinyi Glass Industrial Zone, No. 2, Xinyi Road, ETDZ, Wuhu, Anhui, P.R.China
Tel 0553-5895518
Fax 0553-5895777
Company Name Xinyi Glass (Tianjin) Co., Ltd
Address No. 33. Quanfa Road, Wuqing Development Area, Tianjin, P.R.China
Tel 022-82173377
Fax 022-82177773

中国3C认证.PDF

澳洲AS-NZS2208.jpg

美国IGCC认证.jpg

英国BSI证书.pdf

加拿大IGMA认证.jpg

日本JIS证书.jpg

cert-2014.pdf

ISO9001;2000.jpg

Copyright © 2011 Xinyi Glass Group All rights reserved.   Legal Statement | Links | ICP NO. 05079345
 Service Tel.:400-8899-036